User Manual Q&AAnswer
Dec 02, 2024 - 03:26 AM
Connecting the ERINGOGO Karaoke Sound Mixer to your karaoke machine is a straightforward process. Here are the steps to follow:
1. Check the available audio output connections on your karaoke machine. The most common connection options are RCA or 3.5mm audio output jacks.
2. Locate the corresponding audio input connections on the Karaoke Sound Mixer. It typically has RCA or 3.5mm audio input jacks.
3. Use an appropriate audio cable (RCA or 3.5mm) to connect the audio output of your karaoke machine to the audio input of the Karaoke Sound Mixer. Ensure that the cables are securely plugged into both devices.
4. Once the audio connection is established, connect your microphones to the microphone inputs on the Karaoke Sound Mixer. The number of microphone inputs may vary depending on the model.
5. Power on your karaoke machine and the Karaoke Sound Mixer. Make sure they are both connected to a power source.
6. Adjust the microphone volumes, echo levels, and music balance using the intuitive controls on the Karaoke Sound Mixer. Refer to the user manual for specific instructions on how to adjust these settings.
7. Test the setup by playing music through your karaoke machine and singing into the microphones. Adjust the settings as needed to achieve the desired audio balance and effects.
By following these steps, you should be able to successfully connect and set up the ERINGOGO Karaoke Sound Mixer with your karaoke machine. If you encounter any difficulties or have further questions, refer to the user manual for additional troubleshooting tips and guidance.
Add New Comment