User Manual Q&AAnswer
Dec 02, 2024 - 03:13 AM
To connect the Aveek V8 wireless microphone to an audio device, please follow these steps:
1. Ensure that the receiver is powered on and the green power indicator light is illuminated.
2. Connect the receiver to your audio device using a compatible cable. The Aveek V8 is only compatible with 6.35mm or 1/4 inch audio devices.
3. Open the battery cover of the microphone and install 2 AA batteries, making sure to align the positive and negative directions as indicated.
4. Press and hold the microphone's power button to turn it on. The microphone's display screen will light up, indicating that it is powered on. If the red indicator light illuminates, it means the battery power is low and should be replaced.
5. The receiver and microphone will automatically pair, and the receiver's RF blue indicator light will illuminate, indicating that they are connected and ready to work.
Please note that proper frequency selection and coordination may be necessary to minimize interference in crowded RF environments. Refer to the user manual for more detailed instructions and troubleshooting tips.
For additional information and support, please refer to the Aveek V8 Wireless Microphone Instruction Manual.
Add New Comment