User Manual Q&AAnswer
Dec 02, 2024 - 03:01 AM
To connect your laptop to the , follow these steps:
1. Make sure your laptop and the projector are both powered off.
2. Locate the HDMI or VGA port on your laptop. If your laptop has an HDMI port, use an HDMI cable. If it has a VGA port, use a VGA cable.
3. Connect one end of the HDMI or VGA cable to the corresponding port on your laptop.
4. Locate the HDMI or VGA input port on the projector. It is labeled "HDMI" or "VGA" respectively.
5. Connect the other end of the cable to the HDMI or VGA input port on the projector.
6. Power on the projector and wait for it to start up.
7. Power on your laptop.
8. On the projector remote control, press the "Source" button to select the HDMI or VGA input source, depending on the cable you used.
9. The projector should now display the screen of your laptop. If not, you may need to adjust the display settings on your laptop to mirror or extend the display to the projector.
For more detailed instructions and troubleshooting tips, please refer to the user manual provided above.
Add New Comment