User Manual Q&AAnswer
Dec 02, 2024 - 02:33 AM
To connect the camera to your NVR, follow these steps:
1. Connect the supplied Ethernet cable to the LAN connection on the camera.
2. Plug the other end of the cable into one of the camera inputs on the back of your NVR.
3. Please note that the power connector is provided as an alternative power option if required. Your NVR will provide power over the Ethernet cable when connected, and a separate power adapter is not required.
For more detailed instructions and illustrations, please refer to the "Connecting the Camera" section in the Swann SWNHD-886MSD Thermal-Sensing Security Camera Instructional Manual.
Add New Comment