User Manual Q&AAnswer
Dec 02, 2024 - 01:38 AM
To set up the Lorex N861D63B Network Video Recorder, please follow the steps outlined in the user manual provided. Here is a brief overview of the setup process:
1. Connect the NVR to a power source using the included AC power adapter.
2. Connect the NVR to a monitor or TV using the included HDMI cable. This will allow you to access the NVR's interface and configure settings.
3. Connect your IP cameras to the NVR using Ethernet cables. Make sure the cameras are powered on and connected to the same network as the NVR.
4. Power on the NVR and wait for it to boot up. You should see the NVR's interface on your monitor or TV.
5. Use the included mouse to navigate the NVR's interface and follow the on-screen instructions to set up your system. This may include configuring network settings, creating user accounts, and adjusting camera settings.
For detailed instructions and illustrations, please refer to the user manual provided with the product. It provides step-by-step guidance on setting up and configuring the Lorex
Add New Comment