User Manual Q&AAnswer
Dec 02, 2024 - 01:08 AM
To connect the NUOPAIPLUS K1 Pro Sound Card Audio Mixer to your computer, please follow these steps:
1. Ensure that your computer is powered on and running.
2. Locate the USB cable that came with the audio mixer.
3. Connect one end of the USB cable to the USB port on the audio mixer.
4. Connect the other end of the USB cable to an available USB port on your computer.
5. Once the mixer is connected to your computer, it should be automatically recognized as a USB audio device.
6. Depending on your operating system, you may need to install drivers for the audio mixer. Refer to the user manual or the manufacturer's website for specific driver installation instructions.
7. Once the drivers are installed, you can select the NUOPAIPLUS K1 Pro Sound Card Audio Mixer as the default audio input and output device in your computer's audio settings.
8. You can now use the audio mixer for recording and streaming purposes with your computer.
Please note that the above instructions are general guidelines, and the specific steps may vary depending on your computer's operating system and settings. It is recommended to refer to the user manual provided with the audio mixer for detailed instructions and troubleshooting tips.
Add New Comment