User Manual Q&AAnswer
Dec 02, 2024 - 12:54 AM
To connect the Vaveren 78022 Wired Microphone to your audio equipment, you will need an appropriate cable depending on the inputs available on your mixer or audio interface. The microphone uses an XLR connector, which is a three-pin connection commonly used for professional audio equipment. Here's a step-by-step guide:
1. Locate the XLR input on your mixer or audio interface. It is usually labeled as "MIC" or "XLR."
2. Take the XLR cable included with the microphone (Black Set A: XLR to 6.35mm Cable or Dark Cyan Mic Set A: XLR to 6.35mm Cable) and connect the female end of the cable to the XLR input on your mixer or audio interface.
3. Take the male end of the XLR cable and connect it to the XLR output on the Vaveren 78022 Wired Microphone. The XLR output is located at the bottom of the microphone.
4. Ensure that the connections are secure by tightening the connectors gently.
5. Once the microphone is connected, adjust the input gain or volume control on your mixer or audio interface to an appropriate level.
6. If you are using speakers, connect them to the output of your mixer or audio interface using the appropriate cables.
7. Test the microphone by speaking or singing into it and adjusting the volume levels as needed.
Note: If your mixer or audio interface does not have an XLR input, you may need an adapter or a different cable to connect the microphone. Consult the user manual of your audio equipment for further guidance on compatible connections.
For more detailed instructions on using the Vaveren 78022 Wired Microphone, please refer to the user manual included in the package.
Add New Comment