User Manual Q&AAnswer
Dec 02, 2024 - 12:05 AM
To use the BH-03 Expert Bug Detector effectively, follow these steps:
1. Power on the device by pressing and holding the power button. The device will start up and display the main screen.
2. Select the mode of operation by pressing the corresponding button on the device. You can choose between Security Mode and Search Mode. Security Mode provides a wider detection range, while Search Mode offers more precise results.
3. Adjust the sensitivity level by using the arrow buttons on the device. Start with the medium sensitivity level and gradually increase it for a more effective search. You can move between sensitivity scales by holding the right arrow button.
4. If you are searching inside an apartment or an area with other signal transmitters, it is recommended to turn off Wi-Fi routers and other signal transmitters. Additionally, you can enable the filters for GSM and Wi-Fi on the detector to minimize interference.
5. Begin the search by moving the device around the area you want to scan. The BH-03 Expert Bug Detector will detect and display any hidden wireless microphones or transmitting cameras it detects.
6. Pay attention to the screen, which will show the average value and top value of the detected signal. The device will also indicate the output signal range and battery status.
7. If the device detects a suspicious signal, it will provide an alert, either through sound or vibration, depending on the selected mode.
8. For a more precise search, you can use the special filters available on the device. These filters help to differentiate between different types of signals.
9. Once you have completed the search, you can power off the device by pressing and holding the power button.
Please refer to the user manual for more detailed instructions and information on using the BH-03 Expert Bug Detector.
Add New Comment