User Manual Q&AAnswer
Dec 01, 2024 - 11:34 PM
To set up remote viewing and motion detection notifications on your mobile device, please follow these steps:
1. Ensure that your SCS Enterprises WF-800-WT Spy Camera is connected to your Wi-Fi network and powered on.
2. Download and install the compatible app for your mobile device. The manual does not specify the exact app, so please refer to the documentation or contact customer support for the correct app name.
3. Open the app on your mobile device and create an account if required. Follow the app's instructions to complete the account setup process.
4. Once logged in, the app should detect the camera automatically. If not, follow the app's instructions to add the camera manually using its unique identifier (usually found on the camera or in the manual).
5. After successfully adding the camera, you should be able to access the live feed by selecting the camera from the app's device list. Make sure your mobile device is connected to the internet (either via Wi-Fi or cellular data) for remote viewing.
6. To enable motion detection notifications, navigate to the camera settings within the app. Look for the motion detection or notification settings and ensure they are turned on.
7. Customize the motion detection settings according to your preferences. This may include adjusting the sensitivity, setting up motion detection zones, or specifying the duration of recordings when motion is detected.
8. Save the settings and exit the app. You should now receive motion detection notifications on your mobile device when the camera detects movement within the specified zones.
If you encounter any issues during the setup process or have further questions, please consult the user manual provided with the camera or reach out to SCS Enterprises customer support for assistance.
Add New Comment