How do I set up the TENVIS TH661 WiFi HD P2P Pan IP Camera? (TENVIS TH661 WiFi HD P2P Pan IP Camera User Guide TENVIS TH661 WiFi HD P2P Pan IP Camera User Guide)

Answer

manuals.plus

Dec 01, 2024 - 09:26 PM

TENVIS TH661 WiFi HD P2P Pan IP Camera image

To set up the TENVIS TH661 WiFi HD P2P Pan IP Camera, you can follow the steps below:

1. Download the "TENVISTY" app from the app Store or Google Play Store, or scan the corresponding QR code to download the app.

2. Register and login to the TENVISTY app.

3. Connect your phone to Wi-Fi.

4. Add the IP camera to the app using one of the following methods:

- Method 1: Add camera via Wi-Fi
- Plug the camera and wait for it to beep.
- If there is no beeping sound, press the reset button for approximately 10 seconds until you hear a successful music.
- After the camera is powered on, add the new camera in the app.

- Method 2: Add camera via Ethernet cable
- Power the camera and connect it via a network cable.
- The camera's yellow light and green light will flicker after its self-test.
- Add the camera to the app.

- Method 3: Connection to power, AP add camera
- Power the camera and wait for its self-test.
- Press the Reset button for 4s-6s to enter AP mode.
- Connect your phone to the camera's Wi-Fi (named after IPC-X, where X represents the middle numbers of the camera UID) using the password 01234567.
- Configure the camera to your home Wi-Fi in the app.

5. Once the camera is successfully added to the app, you can access and control various functions. For more details, refer to the IP camera User manual available on the TENVIS website.

If you encounter any issues or have further questions, you can contact TENVIS support at support@tenvis.com or call +1(833)438-9277 (EST 9:00AM-17:00PM Monday-Friday).

Please note that the above instructions are a summary. For more detailed instructions and troubleshooting, it is recommended to refer to the user manual provided by TENVIS.