User Manual Q&AAnswer
Dec 01, 2024 - 09:09 PM
To connect the Skyline SK-200 Alarm System to the internet, please follow these steps:
1. Install the Internet Hub:
- Connect your Hub to an available port on your Internet Router using the Ethernet cable.
- Plug in the Power Adapter.
- Insert 4 x AAA-Batteries in the Hub for backup power in case of a power outage (optional).
2. Download the SkylinkNet App:
- Visit the App Store on your iOS device and search for "SkylinkNet."
- Download and install the app on your iPhone.
3. Create a SkylinkNet Account:
- Open the SkylinkNet App on your iPhone.
- Tap on "Create Account" and follow the on-screen instructions to create your account.
4. Set up the Internet Hub:
- Open the SkylinkNet App on your iPhone.
- Tap on "Setup Wizard" and select "Internet Hub."
- Follow the on-screen instructions to set up the Internet Hub. This may include scanning the QR code on the hub or entering the hub's serial number.
5. Add Sensors and Keychain Remote:
- Open the SkylinkNet App on your iPhone.
- Tap on "Setup Wizard" and select "Add Device."
- Follow the on-screen instructions to add your sensors and keychain remote to the system. This may involve scanning QR codes or entering device information.
6. Setup Hub Keypad Password:
- Open the SkylinkNet App on your iPhone.
- Tap on "Setup Wizard" and select "Hub Keypad Password."
- Follow the on-screen instructions to set up a keypad password for the hub.
7. Setup Time Zone:
- Open the SkylinkNet App on your iPhone.
- Tap on "Setup Wizard" and select "Time Zone."
- Select your time zone from the list provided.
Once you have completed these steps, your Skyline SK-200 Alarm System will be connected to the internet and ready for remote monitoring and control through the SkylinkNet App on your iPhone.
For more detailed instructions and illustrations, please refer to the user manual provided with the Skyline SK-200 Alarm System Starter Kit.
Add New Comment