User Manual Q&AAnswer
Dec 01, 2024 - 08:28 PM
To connect your device to the CALOVER BH-BTJ01 Jellyfish Lava Lamp Speaker via Bluetooth, please follow these steps:
1. Ensure that the speaker is turned on and in Bluetooth pairing mode. You can turn on the speaker by pressing the "on/off" button once.
2. On your device, go to the Bluetooth settings menu. This can usually be found in the settings app or in the quick settings panel.
3. In the Bluetooth settings menu, make sure that Bluetooth is turned on.
4. Your device will start scanning for available Bluetooth devices. Wait for the CALOVER BH-BTJ01 Jellyfish Lava Lamp Speaker to appear in the list of available devices.
5. Once the speaker appears in the list, tap on it to initiate the pairing process.
6. If prompted, enter the pairing code or PIN. The default pairing code for the CALOVER BH-BTJ01 Jellyfish Lava Lamp Speaker is usually "0000" or "1234". Refer to the user manual for the specific pairing code.
7. After entering the pairing code, your device should connect to the speaker. You may hear a confirmation sound or see a notification on your device indicating a successful connection.
8. Once connected, you can start playing audio from your device, and it will be streamed to the CALOVER BH-BTJ01 Jellyfish Lava Lamp Speaker.
If you are still experiencing issues with the Bluetooth connection, try the following troubleshooting steps:
- Make sure that the speaker and your device are within the Bluetooth range of 33 feet.
- Check for any obstacles or interference between the speaker and your device that may weaken the Bluetooth signal.
- Restart both the speaker and your device.
- Forget the speaker from your device's Bluetooth settings and repeat the pairing process from step 2.
If the issue persists, refer to the troubleshooting section in the user manual or contact the manufacturer for further assistance.
Add New Comment