User Manual Q&AAnswer
Dec 01, 2024 - 08:06 PM
To set up your FOSA DLP Smart Projector, please follow these steps:
1. Unbox the projector and ensure that all the included accessories are present, including the mini projector, holder, charger, HD Multimedia Interface (HDMI) cable, remote control, and user manual.
2. Find a suitable location for the projector. It can be placed on a table or mounted on a wall using a compatible wall mount.
3. Connect the projector to your video source. If you are using an HDMI source, connect one end of the HDMI cable to the HDMI port on the projector and the other end to the HDMI output on your video source, such as a laptop or streaming device. If you are using a different type of connection, refer to the user manual for the appropriate steps.
4. Plug in the charger to the projector and connect it to a power outlet. Ensure that the power outlet is functioning correctly.
5. Power on the projector using the designated power button, either on the projector itself or on the remote control. Wait for the projector to boot up.
6. Use the remote control to navigate the projector's on-screen menu and adjust settings as needed, such as display mode, brightness, and keystone correction.
7. Select the appropriate input source on the projector to match the connected video source. This can usually be done through the on-screen menu or by pressing the input/source button on the remote control.
8. Once the input source is selected, you should see the projected image on the screen or wall. Adjust the focus and keystone correction, if necessary, to ensure a clear and properly aligned image.
9. You can now start enjoying your FOSA DLP Smart Projector for presentations, educational content, home entertainment, gaming, or social gatherings.
For more detailed instructions and troubleshooting tips, please refer to the user manual included in the box.
Add New Comment