User Manual Q&AAnswer
Nov 30, 2024 - 05:23 AM
To fill the water tank of the COSLUS F5020E Water Dental Flosser, please follow these steps:
1. Ensure that the flosser is turned off and unplugged from the power source.
2. Locate the water tank at the back of the device. It is a removable container with a capacity of 300ml.
3. Gently lift the water tank upwards to detach it from the main unit.
4. Unscrew the cap of the water tank in a counterclockwise direction to open it.
5. Fill the water tank with clean water up to the desired level. It is recommended to use lukewarm water for a comfortable flossing experience.
6. Avoid overfilling the tank to prevent any spillage when reattaching it to the flosser.
7. xxxx the cap back onto the water tank in a clockwise direction, ensuring it is tightly closed.
8. Align the water tank with the corresponding slot on the main unit and firmly push it downwards until it clicks into place.
9. Ensure that the water tank is securely attached before using the flosser.
Please refer to the user manual for additional information and safety precautions regarding the use of the COSLUS F5020E Water Dental Flosser.
Add New Comment