User Manual Q&AAnswer
Nov 30, 2024 - 05:03 AM
To connect the Axis P9106-V Network Camera to your network, follow these steps:
1. Locate the camera's Ethernet port: The camera should have an Ethernet port on the back or bottom of the device. It may be labeled as "LAN" or "Ethernet."
2. Connect the camera to your network: Use an Ethernet cable to connect the camera's Ethernet port to an available port on your network switch or router. Ensure that the cable is securely plugged in on both ends.
3. Power on the camera: Connect the camera to a power source using the provided power cable. Follow the manufacturer's recommendations for power supply and connection.
4. Verify network connectivity: Once the camera is powered on and connected to the network, check the network switch or router to ensure that the camera is receiving an IP address. You can usually do this by checking the device list or DHCP lease table on your network management interface.
5. Access the camera's web interface: Open a web browser on a computer connected to the same network as the camera. Enter the camera's IP address or hostname in the browser's address bar. Consult the camera's documentation or user manual for the default IP address or how to find the camera's IP address if it is not known.
6. Configure the camera's network settings: Once you have accessed the camera's web interface, navigate to the network settings section. Here, you can configure the camera's IP address, subnet mask, gateway, and other network settings to match your network configuration. Consult the camera's documentation or user manual for detailed instructions on configuring network settings.
7. Save and apply the settings: After configuring the network settings, save the changes and apply them to the camera. The camera may need to restart or reconnect to the network for the new settings to take effect.
8. Test the camera's network connectivity: Once the camera has applied the new network settings, verify its network connectivity by accessing the camera's web interface again using the updated IP address or hostname. Ensure that you can access the camera's settings and view the live video feed.
By following these steps, you should be able to successfully connect the Axis P9106-V Network Camera to your network for surveillance purposes. For more detailed instructions and troubleshooting, refer to the camera's Installation Guide or contact Axis support.
Add New Comment