User Manual Q&AAnswer
Nov 30, 2024 - 04:53 AM
To connect your laptop to the BenQ MW560 projector, you will need an appropriate cable or adapter depending on the available ports on your laptop. Here are the steps to set up the connection:
1. Identify the available ports on your laptop: Check if your laptop has an HDMI or VGA port. If it has an HDMI port, you can directly connect an HDMI cable from your laptop to the HDMI input on the projector. If your laptop has a VGA port, you will need a VGA cable to connect to the VGA input on the projector.
2. Connect the cable: Once you have identified the appropriate cable, connect one end to the corresponding port on your laptop and the other end to the HDMI or VGA input on the projector.
3. Select the input source on the projector: Turn on the projector and press the "Source" or "Input" button on the projector or the remote control to select the input source. Choose HDMI or VGA, depending on the cable you have connected.
4. Adjust laptop display settings: On your laptop, go to the display settings and ensure that the external display (projector) is recognized. You may need to extend or duplicate your laptop's display to the projector.
5. Adjust projector settings (if necessary): Use the projector's remote control or on-screen menus to make any necessary adjustments, such as keystone correction or aspect ratio, to ensure the projected image is aligned and sized correctly.
6. Start your presentation: Once the connection is established and the settings are adjusted, you can start your presentation on your laptop, and it will be displayed on the BenQ MW560 projector.
For more detailed instructions and troubleshooting tips, please refer to the user manual provided with the BenQ MW560 projector.
Add New Comment