User Manual Q&AAnswer
Nov 30, 2024 - 04:43 AM
To pair the remote control with the SMART SLR60WI2 projector, please follow these steps:
1. Ensure that the projector is turned on and in standby mode.
2. Point the remote control towards the front of the projector, where the sensor is located.
3. Press and hold the Menu button on the remote control for about 3 seconds until the projector's on-screen menu appears.
4. Use the arrow buttons on the remote control to navigate to the "Settings" or "Setup" menu.
5. Within the settings menu, look for an option related to "Remote Control Pairing" or "Pairing Mode."
6. Select the pairing option and follow any on-screen prompts or instructions.
7. The projector may display a code or indicator to confirm that it is in pairing mode.
8. On the remote control, press and hold the Enter button for a few seconds until the remote control's LED indicator starts flashing.
9. The projector should detect the remote control and establish a connection. The LED indicator on the remote control will stop flashing once the pairing is successful.
10. Test the remote control by pressing various buttons to ensure they are functioning correctly.
If you encounter any difficulties during the pairing process, refer to the user manual provided with the SMART SLR60WI2 DLP projector for specific instructions and troubleshooting tips.
Add New Comment