User Manual Q&AAnswer
Nov 30, 2024 - 04:39 AM
To connect the Behringer SB 78A microphone to your audio interface or mixer, follow these steps:
1. Make sure your audio interface or mixer is powered off before connecting any cables.
2. Locate the XLR connector on the SB 78A microphone. It is a three-pin connector.
3. Take an XLR cable and connect one end to the XLR connector on the SB 78A microphone.
4. Locate the XLR input on your audio interface or mixer. It is also a three-pin connector.
5. Connect the other end of the XLR cable to the XLR input on your audio interface or mixer.
6. If your audio interface or mixer provides phantom power, make sure it is turned on. The SB 78A microphone requires +48V phantom power to operate.
7. Once the microphone is connected, power on your audio interface or mixer.
Please refer to the user manual for your specific audio interface or mixer for any additional setup or configuration steps that may be required.
Note: It is important to handle the microphone and cables with care to avoid any damage. Always turn off phantom power when connecting or disconnecting the microphone to prevent potential damage.
Add New Comment