User Manual Q&AAnswer
Nov 30, 2024 - 04:03 AM
To pair the microphones with the receiver in the Supersonic SC-900 Wireless Dual Microphone System, please follow these steps:
1. Make sure the receiver and microphones are powered on and within range of each other.
2. On the receiver, locate the "Pair" or "Sync" button. This button is usually found on the front or back panel of the receiver.
3. Press and hold the "Pair" or "Sync" button on the receiver until the LED indicator starts flashing or changes color.
4. On each microphone, locate the power switch or button. Turn on the microphone(s) by pressing and holding the power switch or button until the LED indicator on the microphone starts flashing or changes color.
5. Within a few seconds, the receiver and microphones should automatically pair and establish a connection. The LED indicators on both the receiver and microphones should stop flashing and remain solid, indicating a successful pairing.
6. Test the microphones by speaking or singing into them and checking if the audio is being picked up by the receiver.
Note: If the microphones do not pair automatically, refer to the user manual for any specific instructions or troubleshooting steps. It is also important to ensure that the microphones and receiver are within the recommended range and that there are no obstructions or interference affecting the wireless signal.
Add New Comment