User Manual Q&AAnswer
Nov 30, 2024 - 03:32 AM
Adjusting the voltage and current on the Yisung HJS-1000-0-60 power supply is a straightforward process. Here are the step-by-step instructions:
1. Setup: Ensure the power supply is placed on a stable surface and connected to a suitable wall outlet. Make sure the load or equipment you want to power is turned off before making any connections.
2. Connection: Connect the positive and negative output terminals of the power supply to your equipment or load as required.
3. Powering ON: Turn on the power switch located at the back or front of the power supply. The LED display should light up, indicating that the power supply is on and operational.
4. Adjusting Voltage: Use the 'Voltage' xxxx on the power supply to adjust the desired output voltage. Rotate the xxxx clockwise to increase the voltage and counterclockwise to decrease it. The LED display will show the set voltage.
5. Adjusting Current: Use the 'Current' xxxx on the power supply to set the desired current limit. This will prevent drawing more than the set current from the power supply. Rotate the xxxx clockwise to increase the current limit and counterclockwise to decrease it.
6. Monitoring: Keep an eye on the LED displays to monitor the current output and voltage levels. The displays will show the actual values of the output voltage and current.
It is important to note that the Yisung HJS-1000-0-60 power supply offers precision controls, allowing you to set precise values for your applications. The voltage accuracy is ±1%, and the current accuracy is also ±1%.
Please refer to the user manual for more detailed information and safety precautions related to the Yisung HJS-1000-0-60 power supply.
Add New Comment