User Manual Q&AAnswer
Nov 28, 2024 - 12:15 AM
To connect the Pyle PDMIKT120 USB Podcast Microphone to your computer, follow these steps:
1. Unbox and assemble the microphone on its stand if necessary.
2. Locate an available USB port on your computer.
3. Connect the USB cable provided with the microphone kit. One end has a USB-A connector that goes into your computer's USB port, while the other end (usually USB-B or USB-C) connects to the microphone.
4. Windows should automatically detect the microphone as a USB audio device and proceed to install the necessary drivers. You might see a notification confirming the successful driver installation. Allow Windows a moment to complete this process.
5. Launch your preferred audio recording or streaming software on your computer.
6. Confirm that the Pyle PDMIKT120 microphone is selected as the input or recording device within the software settings.
7. Adjust the microphone level or gain as necessary to attain the desired audio volume.
Please refer to the "Setup" section of the user manual for more detailed instructions and troubleshooting tips.
Add New Comment