User Manual Q&AAnswer
Nov 27, 2024 - 11:52 PM
To connect microphones to the NUOPAIPLUS X600 Professional Audio Mixer, please follow these steps:
1. Identify the microphone inputs on the mixer. The X600 typically has XLR inputs for microphones, which are three-pin connectors.
2. Locate the XLR cables that came with your microphones. These cables have XLR connectors on both ends.
3. Plug one end of an XLR cable into the microphone's XLR output. Make sure it is securely connected.
4. Take the other end of the XLR cable and plug it into one of the XLR inputs on the X600 mixer. Match the pins on the XLR connector with the corresponding holes on the mixer's XLR input.
5. Repeat steps 3 and 4 for the second microphone, connecting it to another available XLR input on the mixer.
6. Once both microphones are connected, adjust the input gain for each microphone on the mixer. The input gain controls are typically located near each XLR input and allow you to adjust the microphone's volume level.
7. Test the microphones by speaking or singing into them and monitoring the audio output from the mixer. Adjust the input gain as needed to achieve the desired volume level without distortion.
Note: If your microphones require phantom power (often needed for condenser microphones), make sure to activate the phantom power switch on the mixer if available. Refer to the user manual for specific instructions on activating phantom power.
For further details and illustrations, please refer to the NUOPAIPLUS X600 Professional Audio Mixer User Manual included in the product package.
Add New Comment