How do I install the Kwikset ‎99380-001 Keypad Smart Door Lock on my door? (Kwikset ‎99380-001 Keypad Smart Door Lock Installation Guide)

Answer

thedeskzone2020

Nov 27, 2024 - 11:29 PM

To install the Kwikset ‎99380-001 Keypad Smart Door Lock, follow these steps:

1. Prepare your door by checking its compatibility. Ensure that you have a standard deadbolt mounted and remove the existing deadbolt from your door.
2. Measure the dimensions of your door to confirm compatibility. Measure the hole in the door (2-1/8" or 1-1/2"), the backset (2-3/8" or 2-3/4"), the hole in the door edge (1"), and the door thickness (between 1-3/8" and 2").
3. Install the latch and strike. Follow the instructions in the user manual, ensuring that the latch face is flush against the door edge and the strike is properly installed on the door frame.
4. Install the exterior keypad. Determine the diameter of the hole in the door and remove the mounting plate from the interior assembly. Install the exterior keypad and mounting plate according to the instructions.
5. Install the interior assembly. Ensure the turnpiece shaft is pointing up and remove the interior cover and battery pack from the interior assembly. Install the interior assembly onto the mounting plate.
6. Install the batteries and perform the door handing process. Insert the batteries into the interior assembly and follow the instructions to perform the door handing process, which teaches the lock the orientation of your door.
7. Test the lock and check door alignment. Ensure that the lock operates smoothly. If there are any issues, replace the previous latch and strike with the ones supplied in the box. If problems persist, contact Kwikset Support for assistance.
8. Install the interior cover. Follow the instructions in the user manual to install the interior cover.

For more detailed instructions and illustrations, refer to the Kwikset ‎99380-001 Keypad Smart Door Lock Installation Guide provided with the product.