User Manual Q&AAnswer
Nov 27, 2024 - 10:31 PM
To connect the Chamberlain CIGBU Internet Gateway to your home router, follow these steps:
1. Use a computer to connect the Internet Gateway to the router. You cannot create an account from a mobile device.
2. Ensure that the Ethernet cable is properly connected from the Internet Gateway to the LAN port (normally numbered 1-4) on your router.
3. Power up the Internet Gateway. The GREEN LED and BLUE LED will blink four times to indicate a correct power connection and reset of the Internet Gateway.
4. After powering up, the LEDs will indicate the status of the Internet Gateway. Refer to the "tips" section in the user's guide for details regarding the LED indicators.
5. If the GREEN LED is off after connecting the Internet Gateway to your router, check the Ethernet cable connection. If the GREEN LED is still off, try another port on your router. If you still cannot get a solid GREEN LED, contact Chamberlain Technical Support.
Please note that these instructions are a summary, and it is recommended to refer to the user's guide for more detailed instructions and troubleshooting tips.
Add New Comment