User Manual Q&AAnswer
Nov 27, 2024 - 10:27 PM
Installing the Kwikset 99140-139 Electronic Smart Lock Conversion Kit is a straightforward process. Here are the step-by-step instructions:
1. Before starting the installation, make sure to measure your door's backset, cross bore, and thickness to ensure compatibility with the conversion kit.
2. Remove the existing deadbolt from your door, including the interior and exterior components.
3. Take the deadbolt interior included in the package and align it with the mounting holes on the door. Insert the screws provided and tighten them securely.
4. Attach the mounting plates to the deadbolt interior using the screws provided. Make sure they are aligned properly and tightened securely.
5. Insert the latch into the edge bore of the door, ensuring that the curved side faces the direction you want the door to close.
6. Attach the strike plate to the door jamb using the screws provided. Ensure that it aligns with the latch when the door is closed.
7. Insert the battery pack into the deadbolt interior, following the correct polarity (+ and -).
8. Test the lock by entering a user code and verifying that it locks and unlocks smoothly.
For more detailed instructions and illustrations, please refer to the Kwikset 99140-139 Electronic Smart Lock Conversion Kit User Manual provided with the product.
Please note that if you encounter any issues during the installation process or have specific questions about your door's compatibility, it is recommended to consult the user manual or contact Kwikset's customer support for further assistance.
Add New Comment