User Manual Q&AAnswer
Nov 27, 2024 - 10:04 PM
To connect audio sources to the Red Panda 3 Channel Bit Mixer, follow these steps:
1. Position the mixer in your audio signal chain: Determine where in your setup you want to place the Bit Mixer. It can be placed on a pedalboard or within your studio setup.
2. Connect audio sources to the input channels: Use audio cables to connect your audio sources, such as synthesizers, drum machines, guitars, or microphones, to the input channels of the Bit Mixer. Each channel has its own input jack.
3. Ensure proper power control: Use the mixer's power switch to turn it on and off. Make sure that the connected devices or amplifiers are also powered on as needed.
Once you have connected your audio sources to the input channels of the Bit Mixer, you can start adjusting the settings and experimenting with the various features and effects it offers. Refer to the user manual for detailed instructions on adjusting bit crushing and sample rate reduction settings, blending clean and crushed signals, and exploring different routing options for creating unique audio textures.
Add New Comment