User Manual Q&AAnswer
Nov 27, 2024 - 09:52 PM
To connect the NUOPAIPLUS V8 PLUS Professional Audio Mixer to your computer, follow these steps:
1. Locate the USB port on the mixer. It is labeled as "Audio Input: USB" in the specification section of the user manual.
2. Connect one end of the provided USB charging cable to the USB port on the mixer.
3. Plug the other end of the USB cable into an available USB port on your computer.
4. Once the mixer is connected to your computer, it will be recognized as a USB audio interface.
5. Set the input and output settings on your computer's audio settings to use the NUOPAIPLUS V8 PLUS as the default audio device.
6. Launch your preferred Digital Audio Workstation (DAW) software on your computer.
7. In the DAW software, select the NUOPAIPLUS V8 PLUS as the audio input and output device.
8. You are now ready to record and playback audio using the NUOPAIPLUS V8 PLUS Professional Audio Mixer connected to your computer.
Note: Make sure to refer to the user manual of your specific DAW software for detailed instructions on how to select and configure audio devices.
Please consult the NUOPAIPLUS V8 PLUS Professional Audio Mixer User Manual for further information and troubleshooting tips.
Add New Comment