User Manual Q&AAnswer
Nov 27, 2024 - 09:50 PM
To set up the CAD Audio WX200 UHF Wireless Dual Handheld Microphone System, follow these steps:
1. Press and hold the power button on the handheld transmitters until the LCD display is illuminated.
2. Power on the receiver and connect it to your output device using either the balanced XLR outputs or the mixed output on the rear of the receiver.
3. Adjust the volume on the front of the receiver to the desired level.
4. The red RF light will illuminate on the receiver once a connection has been established between a transmitter and the receiver.
5. The green AF light will illuminate on the receiver, indicating that it is receiving input from the transmitter.
For more detailed instructions and information, please refer to the CAD Audio WX200 UHF Wireless Dual Handheld Microphone System User Guide.
Add New Comment