User Manual Q&AAnswer
Nov 27, 2024 - 09:47 PM
To connect a wired microphone to the Technical Pro TPPOWER65 Professional Portable PA System, follow these steps:
1. Locate the microphone input on the front or rear panel of the PA system. It is usually labeled as "MIC" or "MIC IN" and may be an XLR or 1/4-inch input.
2. Ensure that the PA system is powered off before making any connections.
3. Take the XLR or 1/4-inch cable that is connected to your wired microphone and plug it into the corresponding microphone input on the PA system. If your microphone has an XLR connector, plug it into the XLR input. If it has a 1/4-inch connector, plug it into the 1/4-inch input.
4. Once the cable is securely connected, power on the PA system.
5. Adjust the volume level for the microphone input using the volume xxxx or control on the PA system. Start with a lower volume level and gradually increase it to avoid feedback or distortion.
6. Test the microphone by speaking or singing into it while monitoring the sound through the PA system's speakers. Adjust the volume and EQ settings as needed to achieve the desired sound.
Note: If you are using multiple microphones, you can connect them to the additional microphone inputs on the PA system following the same steps. Each microphone input will have its own volume control, allowing you to adjust the levels independently.
For more detailed instructions and information, please refer to the user manual provided with the Technical Pro TPPOWER65 Professional Portable PA System.
Add New Comment