User Manual Q&AAnswer
Nov 27, 2024 - 09:46 PM
To connect external effects processors to the Behringer PMP4000, follow these steps:
1. Locate the Effects Send and Return connections on the back panel of the mixer.
2. Connect a cable from the Effects Send output to the input of your external effects processor.
3. Connect a cable from the output of your external effects processor to the Effects Return input on the mixer.
4. Adjust the Effects Send and Return levels on the mixer to set the desired amount of effect in the mix.
5. Use the controls on your external effects processor to adjust the specific effects parameters.
For more detailed instructions and illustrations, please refer to the user manual provided above. Page 9 of the manual specifically covers the connection of external effects processors.
Add New Comment