User Manual Q&AAnswer
Nov 27, 2024 - 08:55 PM
To connect the Atomi Smart Garage Door Opener to your WiFi network, follow these steps:
1. Make sure your Atomi Smart Garage Door Opener is plugged in and the WiFi light is blinking quickly. If not, unplug the device and plug it back in to reboot.
2. Open the Atomi Smart app on your smartphone and ensure you are logged in to your account.
3. Tap on "Add Device" or the "+" sign in the app to start the device setup process.
4. From the device list, select the smart device you want to install (in this case, the garage door opener).
5. Follow the on-screen instructions and press "Continue" on the app.
6. Enter your WiFi network password and tap "Confirm". Make sure you are connected to a 2.4GHz WiFi network, as the Atomi Smart Garage Door Opener cannot connect to 5GHz networks.
7. Press "Go to Connect" and follow the instructions on the screen.
8. On your smartphone, go to the Wi-Fi settings (usually found in the Settings app) and select the "atomi-smart-XXXX" network from the available networks. If you don't see the network, make sure your Atomi Smart Garage Door Opener is powered on and the WiFi light is blinking quickly.
9. Once connected to the "atomi-smart-XXXX" network, return to the Atomi Smart app.
10. The app will detect the connected device and prompt you to select your home WiFi network from the list. Choose your home network and enter the password if required.
11. The Atomi Smart Garage Door Opener will now connect to your WiFi network. Wait for the process to complete.
12. Once connected, you can control and monitor your garage door remotely using the Atomi Smart app.
If you encounter any issues during the setup process, refer to the troubleshooting section in the manual or contact Atomi's customer support for assistance.
Add New Comment