User Manual Q&AAnswer
Nov 27, 2024 - 08:52 PM
To connect the Preeyawadee Classic Retro Condenser Microphone to your computer, you will need an audio interface or mixer with an XLR input. Here's how you can set it up:
1. Locate the XLR cable included with the microphone. One end of the cable has a male XLR connector, while the other end has a connector that matches your audio interface or mixer.
2. Plug the male XLR connector into the microphone's XLR output.
3. Connect the other end of the cable to the XLR input on your audio interface or mixer.
4. If your microphone requires phantom power (typically +48V) to operate, make sure your audio interface or mixer provides phantom power. Activate the phantom power feature if necessary.
5. Once the microphone is connected, set the input level on your audio interface or mixer to an appropriate level for recording. You may need to consult the user manual of your audio interface or mixer for specific instructions on adjusting input levels.
6. Finally, configure your recording software to recognize the Preeyawadee microphone as the input device. In your recording software settings, select the microphone as the input source.
With these steps, you should be able to connect the Preeyawadee Classic Retro Condenser Microphone to your computer and start recording vocals and instruments in your home studio.
Add New Comment