How do I connect the Pyle PDWM2234 Dual Wireless Microphone System to my audio equipment? (Pyle PDWM2234 Portable Dual Wireless Microphone System User Manual)

Answer

thedeskzone2020

Nov 27, 2024 - 08:37 PM


To connect the PDWM2234 system to your audio equipment, follow these steps:

1. Locate the receiver unit and identify the audio output ports. The receiver unit should have a 6.3mm Audio Output Plug and a 3.5mm Audio input.

2. Depending on your audio equipment, choose the appropriate connection method:
   - If you have an amplifier or mixer with a 6.3mm microphone input, use the included 6.3mm Audio Output Plug to connect the receiver's output to the microphone input of your amplifier or mixer.
   - If you have an amplifier or mixer with a 3.5mm audio input, use the included extra cable to connect the receiver's 6.3mm Audio Output Plug to the 3.5mm audio input of your amplifier or mixer.

3. Make sure the receiver unit is powered on by pressing the Power ON button. The receiver indicator light should be ready.

4. Adjust the volume and echo settings on the receiver unit as needed.

5. Turn on the handheld transmitters by pressing the Power ON button on each microphone. The LCD display on the microphone will indicate the battery capacity.

6. Ensure that the handheld transmitters are within the operating range of the receiver unit (typically around 100 to 200 feet).

7. Test the microphone system by speaking or singing into the handheld transmitters. The audio should be transmitted wirelessly to your audio equipment.

Note: For more detailed instructions and troubleshooting tips, please refer to the Pyle PDWM2234 Portable Dual Wireless Microphone System User Manual.