User Manual Q&AAnswer
Nov 27, 2024 - 08:31 PM
To pair the FOSA ankvc8utoge Neckband Earbuds with your device, please follow these steps:
1. Activate the earbuds: Turn on the earbuds by pressing and holding the power button until the LED indicator lights up or you hear a power-on sound.
2. Put the earbuds in pairing mode: Once the earbuds are turned on, they will automatically enter pairing mode. If they don't, press and hold the Bluetooth button until the LED indicator flashes blue and red alternately, indicating that the earbuds are ready to pair.
3. Enable Bluetooth on your device: Open the Bluetooth settings on your smartphone or other Bluetooth-enabled device.
4. Select the earbuds: In the list of available devices, you should see "FOSA ankvc8utoge" or a similar name. Tap on it to connect.
5. Complete the pairing process: Once connected, you should see a confirmation message on your device, indicating that the pairing is successful. The LED indicator on the earbuds should also turn solid blue.
Note: If prompted, enter a passcode or PIN to complete the pairing process. The default passcode is often "0000" or "1234," but please refer to the user manual for the specific passcode of your earbuds.
After the initial pairing, your device should remember the earbuds and automatically connect to them when they are in range and turned on. If you want to connect the earbuds to a different device, make sure to disconnect them from the current device first and repeat the pairing process with the new device.
For more detailed instructions and troubleshooting tips, please refer to the user manual that came with your FOSA ankvc8utoge Neckband Earbuds.
Add New Comment