User Manual Q&AAnswer
Nov 27, 2024 - 08:26 PM
To connect your microphone to the NUOPAIPLUS DJ10 Echo Professional Audio Mixer, follow these steps:
1. Locate the microphone input on the mixer. It is usually labeled as "MIC" or "XLR."
2. Ensure that the mixer is turned off and the microphone is unplugged.
3. Take the XLR cable (usually a three-pin cable) and connect one end to the microphone's XLR output.
4. Take the other end of the XLR cable and plug it into the microphone input on the mixer.
5. Make sure the XLR cable is securely connected to both the microphone and the mixer.
6. Turn on the mixer and adjust the microphone input level using the corresponding control xxxx or fader. Start with a low level and gradually increase it to avoid distortion.
7. Test the microphone by speaking or singing into it. Adjust the input level as needed to achieve the desired volume.
Note: If your microphone has a different type of output, such as a 1/4-inch TRS or TS connector, you may need an adapter or cable to connect it to the mixer's input. Refer to the user manual or consult with a professional if you are unsure about the compatibility or connection process.
Add New Comment