User Manual Q&AAnswer
Nov 27, 2024 - 08:22 PM
To connect the Stagg SDMP15 Dynamic Microphone to your audio interface or mixer, please follow these steps:
1. Locate the XLR connector on the microphone. This is a three-pin connector commonly used for professional audio equipment.
2. Identify the XLR input on your audio interface or mixer. It should be labeled as "MIC" or "XLR" and have three holes or slots to accommodate the three pins of the XLR connector.
3. Take the male end of an XLR cable and insert it into the XLR connector on the Stagg SDMP15 microphone. Make sure it is securely inserted and tightened.
4. Take the female end of the XLR cable and connect it to the XLR input on your audio interface or mixer. Again, ensure a secure connection.
5. If your audio interface or mixer requires phantom power (typically +48V for condenser microphones), check whether the Stagg SDMP15 requires it. If it does, activate the phantom power on your audio interface or mixer. However, if the SDMP15 is a dynamic microphone, it does not require phantom power.
6. Once the microphone is connected, adjust the input gain or level on your audio interface or mixer to achieve the desired recording or performance volume.
By following these steps, you should be able to properly connect the Stagg SDMP15 Dynamic Microphone to your audio interface or mixer.
Add New Comment