User Manual Q&AAnswer
Nov 11, 2024 - 10:23 PM
To connect the ACURITE 06101 Wi-Fi Color Display to your Wi-Fi network, please follow these steps:
1. Make sure your router is broadcasting a 2.4 GHz network. The display is equipped with a Wi-Fi module that only supports 2.4 GHz wireless networks.
2. Press the "set" button on the front of the display to enter SET MODE.
3. Open a web browser on your device and type "192.168.4.1" in the address bar, but do not press enter.
4. Go to your device's network settings and find the Wi-Fi signal coming from the display. It will be named by the AcuRite display's model number.
5. Connect to the display's Wi-Fi network. This will disconnect your device from your own Wi-Fi network, which may result in an error message of "No Internet" on your device.
6. If you do not see the display's model number under network settings, press and release the "SET" button on the display to reactivate the Wi-Fi signal.
7. Return to the web browser with "192.168.4.1" in the address bar and press enter. This should bring you to AcuRite's Wi-Fi Display Settings website.
8. If the Settings website doesn't open, disconnect from the display's Wi-Fi on your device and repeat steps 3-7 in a new browser.
9. On the Settings website, select your Wi-Fi network name (SSID) and enter your network password. If you want to download your local forecast through My AcuRite, enter your zip code. Press "Save".
10. Look for the Wi-Fi icon next to the clock on your display to confirm it is connected.
If you are still having trouble connecting, try the following:
- Make sure your display and router are within range of each other. Relocate your display closer to your router if necessary.
- Double-check that you have entered the correct network name (SSID) and password. Both are case-sensitive.
- Ensure that DHCP is enabled on your router. Most routers have DHCP enabled by default.
- Reset the display by pressing and holding the RESET button for 10 seconds, located in the battery compartment of the display. Date and time will need to be entered after a reset.
If you continue to experience issues, please refer to the troubleshooting section of the ACURITE 06101 Wi-Fi Color Display Instruction Manual or contact AcuRite customer support for further assistance.
Add New Comment