User Manual Q&AAnswer
Nov 11, 2024 - 10:16 PM
To switch between different modes on the AJAZZ AK820 PRO Mechanical Keyboard, you can use the switch located on the keyboard. Here are the steps:
1. USB Wired Mode: The default mode is the USB wired mode. Toggle the switch to the middle position to activate the USB wired mode.
2. 2.4G Wireless Mode: Toggle the switch to the right position to activate the 2.4G wireless mode. The R button on the keyboard will flash green light slowly. Insert the receiver to enter the 2.4G connection mode.
3. Bluetooth Mode: Toggle the switch to the left position to activate the Bluetooth mode. There are three BT channels available. To switch between channels, use the following combinations:
- BT Channel 1: Short press FN+Q to switch the BT channel. The light of the Q button will flash slowly. After successful reconnection, the light returns to the normal lighting effect.
- BT Channel 2: Short press FN+W to switch the BT channel. The light of the W button will flash slowly. After successful reconnection, the light returns to the normal lighting effect.
- BT Channel 3: Short press FN+E to switch the BT channel. The light of the E button will flash slowly. After successful reconnection, the light returns to the normal lighting effect.
Please note that for each BT channel, you can also perform a long press of the corresponding combination key (FN+Q, FN+W, FN+E) for 3 seconds to enter the code pairing mode.
For more detailed instructions, you can refer to the user manual provided by AJAZZ or watch the video tutorial on their official website: https://youtu.be/zuLeLoWDI1s
Add New Comment