How do I switch between the different connection modes on the AULA F75 Three Module Wired+2.4G+Bluetooth Mechanica (AULA F75 Three Module Wired+2.4G+Bluetooth Mechanical Keyboard User Manual)

Answer

manuals.plus

Nov 11, 2024 - 09:59 PM


To switch between the different connection modes on the AULA F75 keyboard, follow these steps:

1. Wired Mode: Turn the switch on the keyboard to the wired position (left). This will turn off the keyboard. To connect the keyboard in wired mode, simply plug the provided USB cable into the Type-C interface on the keyboard and connect the other end to your computer.

2. 2.4G Mode: Turn the switch on the keyboard to the 2.4G position (middle). To connect the keyboard in 2.4G mode, you need to manually pair the keyboard with the USB receiver. Press and hold the combination key "FN+~" for about 3 seconds until the blue light flashes quickly. Insert the USB receiver into your computer's USB port. The blue light on the '~' key will stay on for 2 seconds, indicating a successful 2.4G connection.

3. Bluetooth Mode: Turn the switch on the keyboard to the Bluetooth position (right). To connect the keyboard in Bluetooth mode, use the key combination "Fn + number 1, 2, or 3" to enter pairing or search mode. The blue light will flash quickly. In the reconnection state, the blue light will stay on for 3 seconds. Press the corresponding number key (1, 2, or 3) to switch between devices. The keyboard can be connected to devices with Bluetooth BT3.0, BLE4.0, BLE5.0, and above hardware.

Please note that for manual code pairing and Bluetooth connection, it is recommended to keep the keyboard close to the receiver or device for a successful connection.