User Manual Q&AAnswer
Nov 11, 2024 - 09:40 PM
To switch between different modes on the EPOMAKER EK21-X Numpad, you can use the following function key combinations:
1. Fn+0 (Hold 3s): This combination resets the numpad.
2. Fn+1: Short press to switch to BT1 mode; long press to pair devices.
3. Fn+2: Short press to switch to BT2 mode; long press to pair devices.
4. Fn+3: Short press to switch to BT3 mode; long press to pair devices.
5. Fn+4: Short press to switch to 2.4G mode; long press to pair devices.
6. Fn+5: Increases the backlight saturation.
7. Fn+6: Decreases the backlight saturation.
8. Fn+/7: Decreases the backlight speed.
9. Fn+8: Increases the backlight speed.
10. Fn+9: Checks the battery percentage.
11. Fn++: Increases the backlight brightness.
12. Fn+-: Decreases the backlight brightness.
13. Fn+/: Decreases the backlight hue.
14. Fn+*: Increases the backlight hue.
15. Fn+Enter: Toggles the backlight effect.
16. Fn+Backspace: Turns the backlights on or off.
Please refer to the user guide for more detailed instructions on how to use these function key combinations.
Add New Comment