Answer
Nov 11, 2024 - 08:36 PM
To set up the AcuRite 06090 Iris Nano Display, follow these steps:
1. Remove the protective film from the LCD screen.
2. Set the A-B-C switch inside the battery compartment to match the A-B-C switch on the sensor.
3. Install or replace the 3 AAA batteries in the battery compartment, following the polarity diagram.
4. Press and release the "C/ F" button to select between U.S. standard (Fahrenheit, MPH, inch) and metric (Celsius, km/h, mm) units.
5. Place the display in a dry area free of dirt and dust, either standing upright on a tabletop or wall-mounting it using the integrated hanger.
6. Follow the placement guidelines to ensure maximum accuracy, such as keeping the display and sensor within 330 ft (100 m) of each other and away from electronic devices.
7. Wait for the display to synchronize with the sensor, which may take a few minutes.
For more detailed instructions and troubleshooting tips, refer to the AcuRite 06090 Iris Nano Display User Manual.
Add New Comment