User Manual Q&AAnswer
Nov 11, 2024 - 08:19 PM
To connect the Baseus A1893 Smooth Writing 2 Series Multifunctional Stylus to your device, follow these steps:
1. Turn on the stylus by pressing and holding the power button.
2. After power-on, the blue light will start flashing, indicating that the stylus is in pairing mode.
3. On your device, go to Settings and turn on Bluetooth.
4. Select "Baseus-PS026+" from the list of available devices to connect.
5. Once connected, you will see a "Connected" prompt and the blue light on the stylus will stay on, indicating a successful pairing.
Note: If there is no Bluetooth device to pair with after power-on, the blue light will flash for 3 minutes and then stay on, indicating that the pairing mode is off. Make sure your device's Bluetooth is turned on before attempting to connect.
For further customization and settings, you can download the Baseus App from the App Store. After connecting the stylus to Bluetooth, open the app and add the stylus under the "Lifestyle & Office" category. Once added, you can access the stylus page in the app and customize the shortcut functions by clicking on "Double-press/Press Settings."
Please ensure that the stylus is not already connected to other devices and that the battery has sufficient charge during the connection process. If you encounter any issues connecting, try rebooting the stylus and attempting the connection again.
For more detailed instructions, please refer to the Baseus A1893 Smooth Writing 2 Series Multifunctional Stylus User Manual provided in the link.
Add New Comment