How do I add the H1 HomeStation to the Baseus Security App? (Baseus Security App Function User Manual)

Answer

manuals.plus

Nov 11, 2024 - 08:17 PM


To add the H1 HomeStation to the Baseus Security App, follow these steps:

1. Enter the homepage of the app.
2. Click the "Add Devices" button in the middle or the "+" icon button on the top right corner to enter the device adding list.
3. Select the "HomeStation" category.
4. Choose the corresponding model number of the HomeStation.
5. Bind the desired HomeStation to "My home" and click the "Next" button.
6. Follow the on-page guide to power up the HomeStation and connect it to your router. Then, click the "Next" button.
7. Connect your phone to the same WiFi network as the HomeStation and click the "Next" button.
8. Wait until the HomeStation's LED turns blue and click the "Next" button.
9. Long press the SYNC/ALARM OFF button on the HomeStation for about 5 seconds until the LED starts flashing blue. Then, click the "Next" button.
10. Select the corresponding SN code of the HomeStation connected to your phone.
11. Wait until the app successfully binds to the HomeStation.
12. After binding, you can edit the device name and click the "Next" button to proceed.
13. Once you see the message "Added successfully," click the "Next" button to enter the operation guide.
14. Finally, click the "Finish" button to return to the homepage and check the status of the bound HomeStation.

For more detailed instructions, you can refer to the Baseus Security App Function User Manual provided in the link or download the PDF version.