Answer
Nov 11, 2024 - 05:15 AM
To install the Baseus Security P1 Pro Indoor Camera on a wall, please follow these steps:
1. Use a pencil to mark the installation positions on the wall according to the hole spacing on the installation base.
2. Use a drilling tool to drill two holes with a diameter of 6 mm and a depth of 30 mm in the marked positions.
3. Insert the expansion sleeves into the drilled holes.
4. Align the two holes of the installation base with the holes on the wall.
5. Insert the screws through the holes of the installation base.
6. Use a screwdriver to fasten the screws into the expansion sleeves.
7. Align the grooves on the bottom of the camera with the protruding parts of the installation base.
8. Rotate the camera clockwise to lock it in place.
Please refer to the "Camera Installation" section in the Baseus Security P1 Pro Indoor Camera User Manual for visual instructions and illustrations.
Note: It is important to ensure proper installation for the camera's stability and functionality.
Add New Comment