User Manual Q&AAnswer
Nov 11, 2024 - 04:46 AM
To install the Baseus C02 Mega Magnetic Wireless Charging Car Mount, follow these steps:
1. Choose the recommended use scenario: center console/dashboard.
2. Before pasting, clean the surface to be pasted with an alcohol pad and ensure it is dry and clean.
3. Remove the protective film from the gel-backed adhesive and stick the base onto the center console/dashboard. Make sure the soft base is in full contact with the bonding surface.
4. Allow the mount to stand for 24 hours before using.
5. Before use, adjust the handle of the bracket to the desired angle and position.
Please refer to the "Installation Instructions" section of the user manual for more detailed information and illustrations.
Note: It is important to keep the surface to be adhered dry and clean before installation. Also, after applying the gel, let it stand for 24 hours before using to ensure proper adhesion.
Add New Comment