User Manual Q&AAnswer
Nov 11, 2024 - 04:00 AM
To charge the Baseus PPNLD45UC GaN 2 in 1 Power Bank, you can use the AC Charging Mode or the Power Bank Mode.
AC Charging Mode:
1. Connect the power bank to an AC power source using the provided Type-C input cable.
2. If there is no load or the load power is ≤ 7W, the power bank will start charging and the white light will light up and blink to indicate the charging process.
3. If the load power is ≥ 9W, the power bank will automatically charge the load. If the charging power is ≤ 7W, both the load and the power bank will be charged simultaneously until fully charged.
4. The power bank supports PD3.0 + QC3.0 dual quick charge input and output.
Power Bank Mode:
1. When the power bank is at rest, press the power button once to display the current power level.
2. After no load, the LED indicator will turn off after 55 seconds, and the output will automatically turn off after 30 seconds.
3. To charge your mobile phones or other digital devices, make sure the charging voltage of your device is compatible with the voltage output of the power bank.
4. Use the original charging cable of your device and connect one end to your device and the other end to the output port of the power bank. The power bank will automatically start charging your device, and the LED indicator will remain lit.
Please refer to the user manual for more detailed instructions and safety precautions.
Add New Comment