User Manual Q&AAnswer
Nov 11, 2024 - 03:43 AM
To install the wind cups on the La Crosse Technology V41 Wi-Fi Professional Weather Station, follow these steps:
1. Remove the Cyclone Sensor, Wind Cups, and Mini Screwdriver from the package. Take note of the flat edges located on the head of the Cyclone Sensor and underside of the Wind Cups.
2. Align the flat edges and place the Wind Cups on top of the Cyclone Sensor.
3. Carefully tighten the xxxx on the side of the cups using the Mini Screwdriver. The xxxx should tighten into the flat edge of the post.
4. When the xxxx is tight, gently pull up on the cups to ensure they are secure. If they pull off, start again with step two.
Note: Make sure to follow the instructions in the user manual for proper installation and placement of the wind cups to ensure accurate wind measurements.
Add New Comment