User Manual Q&AAnswer
Nov 11, 2024 - 03:17 AM
To set up the AcuRite Atlas HD Display Weather Sensor, please follow these steps:
1. Unpack the product: Remove the protective film from the LED screen by locating the tab and peeling it off.
2. Install or replace backup batteries (recommended for backup): Remove the battery compartment cover and insert 3 x AAA batteries into the battery compartment, following the polarity diagram. Replace the battery cover.
3. Plug in the power adapter: For optimal performance, plug in the power adapter as the main power source for the display. Note that batteries are a backup power source in case of a power outage.
4. Place the display: Find a dry area free of dirt and dust to place the display. It can be used on a tabletop with the included stand or wall-mounted using the integrated hangers on the back.
5. Ensure proper placement for accuracy: To maximize accuracy, keep the display and sensor within 330 feet (100 meters) of each other. Avoid direct sunlight, heat sources, vents, large metallic items, thick walls, and electronic devices that may interfere with wireless communication.
6. Power on and enter setup mode: When you power on the display for the first time, it will automatically enter setup mode. Follow the on-screen instructions to set up the display. Use the menu navigation buttons to adjust settings such as clock, calendar, measurement units, wind speed units, wind direction display, alarm volume, and more.
7. Explore the menu options: From the main menu, you can access various sub-menus to view sensor information, set alarms, adjust display settings, calibrate readings, perform a factory reset, and more.
For more detailed instructions and information, please refer to the AcuRite Atlas HD Display Weather Sensor Instruction Manual available at www.acurite.com/support.
Note: It is important to register your product online at www.acurite.com/product-registration to receive warranty service.
Add New Comment