User Manual Q&AAnswer
Nov 11, 2024 - 03:07 AM
To charge the Baseus Blade2 Fast Charging Bank, please follow these steps:
1. Connect the Type-C input port of the power bank to a suitable charger using the provided charging cable.
2. Ensure that the charger you are using is compatible with the power bank and meets the local safety standards.
3. The power bank supports multiple input voltages (5V, 9V, 12V, 15V, and 20V) and a maximum input current of 3A. Make sure to use a charger that provides the appropriate voltage and current for efficient and safe charging.
4. Once connected, the LED display on the power bank will show the charging status, including the voltage and current information.
5. Allow the power bank to charge until it reaches full capacity. The charging time may vary depending on the charger used and the remaining battery capacity of the power bank.
6. After charging is complete, disconnect the charging cable from the power bank.
It is important to note that the power bank should not be charged in places that may affect its heat dissipation, such as enclosed bags or pockets. Additionally, avoid stacking any devices on top of the power bank during charging, as it may affect heat dissipation.
Add New Comment