How do I set the time and alarm on the Westclox Source 43000X Series Big Ben Moon Beam Alarm Clock? (Westclox Source 43000X Series Big Ben Moon Beam Alarm Clock User Manual)

Answer

manuals.plus

Nov 11, 2024 - 02:35 AM


To set the time on the Westclox Source 43000X Series Big Ben Moon Beam Alarm Clock, follow these steps:
1. Locate the left-hand set  xxxx  at the back of the clock.
2. Rotate the  xxxx  clockwise or counterclockwise until the hour and minute hands indicate the desired time of day.

To set the alarm wakeup time, follow these steps:
1. Locate the right-hand set  xxxx  at the back of the clock.
2. Rotate the  xxxx  clockwise or counterclockwise until the alarm indicator hand indicates the desired wakeup time.

To operate the alarm, follow these steps:
1. Move the alarm selection switch located on the back of the clock above the time and alarm set knobs to the top ON position before going to bed.
2. Five minutes before the alarm wakeup time setting, the lamp will start blinking on and off to gently start the wakeup process.
3. When the time of day coincides with the alarm wake-up time setting, the audible bell wake-up alarm will sound.
4. Moving the alarm selection switch to the lower OFF position turns off the audible bell wakeup alarm sound and the blinking lamp.
5. With the alarm selection switch in the lower OFF position, neither the blinking lamp nor audible wakeup alarm will function.
6. The audible wake-up alarm sound and blinking lamp will automatically turn off after 35 minutes.

For more detailed instructions and information, please refer to the Westclox Source 43000X Series Big Ben Moon Beam Alarm Clock User Manual provided in the link you shared.